4″ Phenolic Wheel – Stem Model 3

Description

Swivel and Rigid caster frames are made from stamped steel that is plated in zinc for corrosion resistance.  The swivel bearing of Stem Caster Model 3 is defined by two rows of ball bearings rotating on hardened raceways.  The center pin is a 1/2” rivet that holds the two ball bearing raceways together and the diameter of the axle is 3/8”.  This stem caster is built with a dust cover to shield the swivel’s ball bearings.  This stem caster performs best if you limit the load to no more than 1,000 lbs on a set of 4 model 3 casters.

Phenolic caster wheels are a hard composition, non-marking wheel that is excellent for large loads that do not move often. Phenolic can not develop a flat spot if left parked for a long period under load, and the wheel is capable of withstanding shock loads and the impacts of small obstructions. Phenolic can absorb water and other chemicals if excessive exposure occurs. Phenolic caster wheels come standard with a roller bearing and have precision sealed ball bearings as an option. Phenolic wheels begin with 3” in diameter and are available for diameters up to 18”. All phenolic wheels have a Durometer of Shore D 90 and the temperature range is -40° to +250° F. Contact us if you need help with placing an order: 800-501-3808

4″ Phenolic Wheel.Plain bore – No Bearing in the Wheel. Shown in photo with 5″ wheels.

For more information and help placing an order, give us a call at 800-501-3808.