5″ Black Donut Wheel – Model L3

Description

Stem Caster Model L3 is made from stamped steel frames with a zinc plating to resist corrosion. This stem caster uses a ⅜” diameter axle and the swivel caster raceway is held together by a ½” diameter rivet. This institutional stem caster is constructed with two ball bearings for enhanced swiveling and changing directions. There is a metal dust cover protecting the raceways to shield them from dust and dirt. If you are going to put more than 800 lbs of weight on four stem casters of this size, please consult with us.

4″ Polyolefin – Black Donut Wheel.Ball Bearings. Shown in photo with 5″ wheels.

Polyolefin Caster Wheels are injection molded from a blend of thermoplastic polymers forming a one piece solid sanitary design. These Polyolefin wheels are especially suited for wet and corrosive applications. They are very resistant to most commonly encountered liquids. Polyolefin wheels have a lower capacity and a more limited temperature range than Nylon wheels. In a cold dry environment, such as a refrigerated store room, Polyolefin wheels may become brittle. They should not be used in a freezer or a heat application above 180°F intermittent usage, such as a rack washer.

This donut shaped wheel comes with sealed ball bearings in the wheel. It’s tread shape enables it to change directions much more easily.

*video shown is with the 5″ Wheel* For more information and help placing an order, give us a call at 800-501-3808.