Your Cart
Total: $0.00
High Temperature Caster Wheels
Showing 1–18 of 41 resultsSorted by latest
Click for Caster Options
High Temperature Phenolic Wheels have a prefix “TP” in the part number and are made with glass fiber. They are best suited for dry heat applications such as powder coating, dry heat bakery ovens and dry heat autoclaves. Temperature Rating: Up to 475°F for continuous use. Then allow to cool to room temperature. 525°F for intermittent use. If used above 475° F for more than 30 minutes continuous operation it will reduce the life of the wheel.
High Temperature Wheels with a prefix “NP” in the part number are made of nylon mixed with glass fiber. They perform best in moist heat applications such as in smokehouses, moist heat bakery and autoclave applications and around water and steam such a pressurized steam-autoclave. Temperature Rating: Up to 425° F for 30 minutes MAXIMUM continuous operation. Then allow to cool to room temperature. If used above 425° for more than 30 minutes continuous operation it will reduce the life of the wheel. High Temperature Glass-Filled Nylon wheels are not recommended for dry heat applications because once the moisture content of the wheel gets to zero, the wheel will shatter.
High temperature wheels with a prefix of “OV” are made of Epoxy mixed with glass fiber. They perform best in both moist heat and dry heat appllications. Temperature Range: UP to 460 degrees Fahrenheit for 60 minutes MAXIMUM continuous operation.
The High Temperature Phenolic Wheels ( prefix “TP” ) , the High Temperature Glass-Filled Nylon wheels ( prefix “NP” ), and the High Temperture “OV” Epoxy Resin Wheels have a hard surface and should be used on smooth floor surfaces. If the floors are rough or if there are obstructions which will impact these wheels it will reduce the service life of the wheels. In any high temperature application it is always best to shield High Temperature Wheels from a direct heat intake source. Consult us for a load capacity rating in your application. We will need the following information: Maximum Temperature and for how long? Maximum load on each caster? Is your application wet or dry?
The above wheels with 1 1/4″ and 1 1/2″ tread width have plain bores and a bushing(s) to fit onto a 3/8″ axle. Wheels with a 2″ tread width have a 3/4″ ID Roller Bearing or Bronze Bearing and come with a steel spanner bushing to fit onto a 1/2″ axle. Some sizes are available with a 3/4″ Plain Bore upon request.
Sterilizer wheels have a prefix “HTR” and are made with an engineered rubber tire bonded to a stainless center. They provide quiet rolling, a cushion ride, and floor protection. These wheels were designed for use on equipment in hospital and laboratory sterilizers and autoclaves. They are also used in other high temperature applications where a cushion ride is needed to protect product being moved. Examples include commercial bakeries and aerospace plants. These wheels are never to be used above 300 degrees Fahrenheit. They should not be used for more than 1 hour continuous. Load capacity rating for the 4 x 1.50 wheel is 200 Lbs, and for the 5 x 2 wheel is 300 Lbs. under ideal operating conditions. The 4 x 1.50 wheel has stainless ball bearings and comes with a bushing to fit a 3/8″ axle. The 5 x 2 wheel has a bronze bearing and fits on a 1/2″ axle.
| WHEEL DLAM. | TREAD WIDTH | Hub Length | Capacity Lbs. | Wheel ONLY Part Number | Fits Axle Size | Heat Type |
|---|---|---|---|---|---|---|
| 3″ | 1 1/4″ | 1 9/16″ | 300 | NP3X1.25-THS | Glass Filled Nylon | 3/8″ | Moist |
| 3″ | 1 1/4″ | 1 9/16″ | 300 | NP3X1.25-SSTHS | Glass Filled Nylon | 3/8″ | Moist |
| 3″ | 1 1/4″ | 1 9/16″ | 300 | TP3X1.25-THS | High Temperature Phenolic | 3/8″ | Dry |
| WHEEL DLAM. | TREAD WIDTH | Hub Length | Capacity Lbs. | Wheel ONLY Part Number | Fits Axle Size | Heat Type |
|---|---|---|---|---|---|---|
| 4″ | 1 1/4″ | 1 9/16″ | 300 | NP4X1.25-THS | Glass Filled Nylon | 3/8″ | Moist |
| 4″ | 1 1/4″ | 1 9/16″ | 300 | NP4X1.25-SSTHS | Glass Filled Nylon | 3/8″ | Moist |
| 4″ | 1 1/4″ | 1 9/16″ | 300 | TP4X1.25-THS | High Temperature Phenolic | 3/8″ | Dry |
| 4″ | 1 1/2″ | 1 5/8″ | 300 | NP4X1.50P | Glass Filled Nylon | 3/8″ | Moist |
| 4″ | 1 1/2″ | 1 5/8″ | 400 | TP4X1.5-3/8PB | High Temperature Phenolic | 3/8″ | Dry |
| 4″ | 1 1/2″ | 1 5/8″ | 200 | HTR4X1.50 | High Temperature Rubber | 3/8″ | Moist |
| 4″ | 2″ | 2 7/16″ | 600 | NP4X2P | Glass Filled Nylon | 1/2″ | Moist |
| 4″ | 2″ | 2 7/16″ | 600 | TP4X2R | High Temperature Phenolic | 1/2″ | Dry |
| WHEEL DLAM. | TREAD WIDTH | Hub Length | Capacity Lbs. | Wheel ONLY Part Number | Fits Axle Size | Heat Type |
|---|---|---|---|---|---|---|
| 5″ | 1 1/4″ | 1 9/16″ | 300 | NP5X1.25-THS | Glass Filled Nylon | 3/8″ | Moist |
| 5″ | 1 1/4″ | 1 9/16″ | 300 | NP5X1.25-SSTHS | Glass Filled Nylon | 3/8″ | Moist |
| 5″ | 1 1/4″ | 1 9/16″ | 300 | TP5X1.25-THS | High Temperature Phenolic | 3/8″ | Dry |
| 5″ | 1 1/2″ | 1 5/8″ | 300 | NP5X1.50P | Glass Filled Nylon | 3/8″ | Moist |
| 5″ | 2″ | 2 3/16″ | 300 | HTR5X2-BRNZ | 1/2″ | Moist |
| 5″ | 2″ | 2 7/16″ | 750 | NP5X2R | Glass Filled Nylon | 1/2″ | Moist |
| 5″ | 2″ | 2 7/16″ | 750 | TP5X2R | High Temperature Phenolic | 1/2″ | Dry |
| WHEEL DLAM. | TREAD WIDTH | Hub Length | Capacity Lbs. | Wheel ONLY Part Number | Fits Axle Size | Heat Type |
|---|---|---|---|---|---|---|
| 6″ | 2″ | 2 7/16″ | 900 | NP6X2R | Glass Filled Nylon | 1/2″ | Moist |
| 6″ | 2″ | 2 7/16″ | 900 | TP6X2R | High Temperature Phenolic | 1/2″ | Dry |
| 6″ | 2″ | 2 7/16″ | 1100 | TPH6X2R | Heavy Duty Straight Sided High Temp Phenolic | 1/2″ | Dry |
| WHEEL DLAM. | TREAD WIDTH | Hub Length | Capacity Lbs. | Wheel ONLY Part Number | Fits Axle Size | Heat Type |
|---|---|---|---|---|---|---|
| 8″ | 2″ | 2 7/16″ | 1100 | NP8X2P | Glass Filled Nylon | 1/2″ | Moist |
| 8″ | 2″ | 2 7/16″ | 1100 | TP8X2R | High Temperature Phenolic | 1/2″ | Dry |
Showing 1–18 of 41 resultsSorted by latest
And if you need CAD files, we’ve got you covered. Contact us today for instant access to our complete CAD database covering all of our Caster products. Our extensive CAD library includes detailed specifications for every model and wheel we manufacture, making it easy to find the exact caster or wheel for your project or need. For premium access to the full database, reach out directly to our Sales Engineer Team by clicking the button below
Caster City® has been supplying the highest quality plate casters, stem casters and wheels since 1977.
This include all casters and wheels: stainless, pneumatic, stem (threaded stem and expanding rubber stem ), swivel, rigid, locking, total locking, replacement, chair and furniture casters. Caster wheels include phenolic, rubber, polyurethane, polyolefin, steel, v-groove.
Caster menu on the top of each page will help you quickly navigate to your desired caster. If you need any help, feel free to call us at: 800-501-3808
Whether you’re in aerospace or pharmaceuticals, we have a caster tailored to your unique needs.
Our casters undergo rigorous testing to ensure they stand up to the demands of your industry.
Not finding what you’re looking for? Our team is on standby to craft a caster solution just for you.
We’re more than suppliers; we’re industry experts. Let’s find the best caster solutions your challenges.
